Unifi, a high-speed broadband (HSBB) service provided by TM in Malaysia. Unifi @ athena.my is a web site that provides unofficial HSBB handbook, which includes advanced articles and guidances regarding the Unifi service.
The default username/password combinations for TMnet DIR-615 G1 routers between firmware versions 7.01 to 7.05 are :
- Username : admin
- Password :
- Username : admin
- Password : telekom
However, there is also a secondary account which must have its password changed in order to fully secure your network :
- Username : operator
- Password : telekom
- Username : operator
- Password :
The secondary 'operator' account should be able to change both passwords on the system. It is also recommended that you 'untick' every available 'service' below the password management fields.
- Disable TR-069 Protocol (remote auto-configuration)
The premade configuration file for the DIR-615 VLAN bridge (firmware 7.05). The default username/password combination for this config file is :
- Username : admin
- Password : rizvanrp
- Username : operator
- Password : rizvanrp
MikroTik RB250GS
"The RB250GS is a low cost SOHO switch in a small plastic case. It has 5 Gigabit ethernet ports powered by an Atheros switch chip. It is powered by a new operating system designed specifically for Mikrotik Switch products - SwOS. SwOS is configurable from your web browser. It gives you all the basic functionality of a managed switch, plus more."
- Open up your web browser and head over to http://192.168.88.1 . The default login for this switch is the username 'admin' with a blank password.
Huawei EC2108E (IPTV)
The Huawei EC2108E STB has an advanced configuration menu that you might be interested in accessing and playing around with. Whatever you do :
- Do not select the last option (RESTORE PARAMETER) -- it will reset your STB configuration to factory settings and lock you out of the IPTV service.
- Do not edit of the URL/addresses/network settings in the configuration pages. This will also cut off your access to the IPTV service.
- To enter the STB, configuration menu.. enter #1397# in the channel selection input.
- This will automatically load the STB configuration menu login. Enter 8288 as the password and press Enter/OK.
- You should now see the full configuration menu. Remember the warnings that I listed above.
- This is the 'TV Standard Configuration'. This is probably what you want to change.
- When you're done, you must save the settings by entering a secondary password in the 'Password' field. This password is 3008.
- Some additional STB information :
- After you have saved your settings, head back to the main menu and select Reboot. Remember, this guide is intended for advanced users and I'm not responsible if you somehow manage to screw up your STB configuration here. Try not to fiddle around with things that you're clueless about :P